4 Bedroom Bungalow House Plan with Two Sitting Rooms

The house is accessed through a sit-out veranda that leads into the main lounge, which serves as the primary formal sitting room. This space is fairly central and acts as the first major point of entry into the house. From the main lounge, movement continues into an open lobby that connects to other key areas of the building. The dining area is positioned deeper within the house and is not directly adjacent to the kitchen, meaning food movement requires passing through internal circulation spaces rather than a direct connection.

The kitchen is located toward one end of the building and is relatively isolated from the dining space. It is supported by a store and nearby toilet, making it more of a service zone. This placement suggests the design prioritizes separation between cooking activities and the main social spaces, which is common in more traditional layouts.

A mini lounge is positioned separately from the main lounge and functions as a family living area. This second sitting room is more private and sits closer to the bedroom section of the house, making it ideal for everyday relaxation without using the formal lounge.

The four bedrooms are well distributed across the plan. The master bedroom is the most private, featuring a walk-in wardrobe and an ensuite bathroom. The remaining three bedrooms also have wardrobe spaces and access to toilets, with one bedroom suitable for guests located closer to the main living areas. Toilets are spread across the house to serve both visitors and residents without overlapping private spaces.

The total dimensions of the ground floor plan are approximately 17.75 meters wide and 20.32 meters long, which converts to about 58 feet by 67 feet.

Based on these dimensions, this house plan is not suitable for a standard single plot of 50 by 100 feet. The width alone already exceeds the 50ft plot size, and even without considering mandatory setbacks on both sides, the building cannot realistically fit on one plot. In practical terms, this design would require at least 2 plots (100×100ft or similar) to be properly accommodated while meeting normal building regulations and ensuring proper ventilation and access around the building.